Truck Windshields Jim Thorpe PA
We Can Arrive in Just a Couple Hours!
Get our professional technicians at your door within hours for most jobs.
We normally have a repair van in the area, quite possibly directly in Jim Thorpe or close by! Our repair experts are qualified to service all makes and models of vehicles. We service Jim Thorpe plus all close-by communities in PA.
- Friendly, trustworthy & experienced technicians
- 24/7 mobile assistance
- Free consultations
- 100% satisfaction guarantee
- Written pricing, up front, no add-ons
- All makes and models of vehicles
- We come to your location
- We work with your insurance company
- Customer service is our top priority
Jim Thorpe Truck Windshield Repairs
Truck drivers have enough to think about. There is no need to add to the list finding a truck glass repair shop. We help many, many trucks and can help get your truck's windows fixed immediately. Our service technicians will have the capacity to repair your truck glass very quickly. If it can be repaired, we will do that. If the glass must be replaced, we can take care of that also. Where ever you are on your trip, we can come to you and make the repairs. We are a totally mobile truck glass repair operation. We can also service your truck at our shop. The decision is yours. Get more Windshield Replacement Cost information here.
Semi Truck Windshield Repairs in Jim Thorpe
While truck's windshields sit higher than a car's, they can not stay away from rock flying up and resulting in chip damage. Usually we can fix a small rock chip in your truck's glass. We are reliable truck windshield technicians and we can deal with any type of small chip as a windshield repair.
Get operating again with your truck. Call today to get your truck glass repaired quickly.
Truck Window Replacement PA 18229
How is big rig windshield care different from regular care?
- Experienced big rig truck drivers recognize that they ought to not trail other big rigs too closely in bad road conditions. This decreases the possibility of rocks kicking up.
- Avoidance is key and truck drivers understand that. For this reason, they generally park in protected areas.
- Truck drivers are specialists. As soon as they do get a chip or crack in their windshields, they get it repaired right away.
Semi truck drivers and big rig truck drivers will have commercial insurance. Commercial truck insurance will have various levels of acceptable equipment conditions than standard car insurance policies. Most service vehicles must be in great shape in order to be driven, so truck drivers ought to quickly address windshield damage to make sure that they do not break the terms of the business vehicle insurance. Click for Best Truck Glass Repair information.
Big rig windshields are built to last. However, if you drive a commercial truck or van, you know that the risk you will face of damage as you log a lot of highway miles is a bit greater than the risk a driver of an economy car will face.
Jim Thorpe Emergency Truck Glass Repairs
When your truck has a broken windshield, door glass or back glass, it is much more than just a hassle, it is a safety consideration. Worse yet, this problem can render your truck unusable until it gets corrected. We are the absolute best option for all your truck's glass repairs. We offer emergency service when you need it the most!
Emergency Service You Want!
As a trusted truck glass service center in Jim Thorpe, we pride ourselves on our fastidious approach to truck glass replacement. While your repair job will be performed very rapidly, it is also performed with exacting standards. Safety is the number one concern we have. We will not discharge your truck until our service technicians are 100% certain that the fix is completed to our high standards.
Cracked Dashboard On A 2002 Stratus!!?
So The Dashboard On My Stratus Cracked And Its On The Panel And Near The Vents By The Windshield In The Front I Have Read This Is Common But Did Anyone Get This Fixed If So How??!
auto shops that specialize in interior repair can repair some of the damage to it,we have few done once in a while that aren't to messed up,or you can use a dash cap on it,either one works.
Is My 2008 Dodge Avenger Totaled?
Well The Fronts Pretty Bad But On The Back Only The Bumper And Both Tail Lights Are Gone. The Engine Looks Fine And So Does The Frame The Windshield Is Crack And All The Air Bags Went Off No Side Or Roof Damage. I Can Send Pictures So Please Help Me Out Im Going Crazy.
First of all. A car is only totaled if:
1.) The car is no longer driveable (even with extensive repairs)
[example: car caught fire and burnt the entire vehicle]
2.) The cost of repairs is larger than the value of the vehicle
[example: $30 000 car needs $35 000 in repairs after accident, this is for your insurance company to decide]
Just because the airbags deployed does not mean its totaled.
I hope you were not injured.
I hope this helped
I work at a Chrysler Jeep Dodge dealership.
After looking at those pictures, I came to the conclusion that it is NOT totaled.
-The hood will probably be around 1000$
-The bumper, grill and frontal area will be 3500$
-Now, this is by you judging that the motor is intact, so the engine is 0$.
-Both side wings (near wheels) will be around 1500$ together (Unfortunately, you must replace the entire section)
-Windshield is about 250$
-The rear bumper is $1500
-Tail lights are 350$ for a pair.
-You might have bent the axel, broken a rim. You might have to get that realigned. But the body work is not what you should be worried about. The engine, transmission, driving shaft, radiator, axel and other parts are going to be the most expensive. But keep in mind you said it didnt seem damaged.
I hope you will be fine.
Probably around $10 000 (with tax). This Avenger looks pretty new, is it an 2008 Dodge Avenger SXT (base version, there is also the R/T). Sale price of a new one is about 21 000$. This means that with depreciation, it is worth around $17 000. Therefore it is NOT totaled. By the way, all prices are in Canadian Dollars (I live in Montreal).
Ive seen quite a few damaged cars in the garage/delearship. I have seen (among others, but the most damaged one (there are actually 2)):
-A 2005 Dodge Ram 2500, which was towing a trailer, flipped over and crashed. The trailer then smacked into the rear of the truck. Everything was like your side wings (the bulge over the front wheels, on the side of the car, a continuation of the bumper) but amplified 10 times. This was everywhere on the truck, not just the front and rear, but the top sides, windshield, everywhere. It was not totaled.
-A brand new 2008 Ford Mustang GT (which was modified) got hit by hail from a hailstorm (the hail was a bit bigger than the size of a golf ball). The hood and roof were badly damaged. But the hail hit the entire surface of the car. It was not totaled.
But in both cases, the engine, etc... was not affected. Let me know how this ends
Replacing Front Windshield 1986 Volvo 740?
Ok Guys/Girls This Is A 2 Part Question.
First Of All I Need To Know How To Remove A Used Windshield From A Junkyard 740 Volvo Without Cracking It So I May Install It In My Car.(Perticulary The Removal Of The Urathane Adhesive)
And The Second Part Is How Do U Replace The Windshield
If Anyone Can &Quot;Walk&Quot; Me Through This Procedure So To Speak Plse Any Advice Would Help Since Replacement Is Near 500 Bucks And If I Can Atleast Get A Used One Out Its Only 50 For An Auto Glass Shop To Do The Labor
okay cheapo here goes.
First go to a junk yard and get the windshield. they should have one laying around and it will be relatively inexpensive. No more than $100 bux alright? Then Inspect it and make sure the edges are clean of all rubber insulation and debris.
Second.- and here's where you can be cheap and smart at the same time. Okay-
you need a coat wire hanger.
straighten it out.
Sharpen a point on one end and heat this point up with a lighter or torch whatever.
then.. after it glows red hot you insert it into the rubber molding between the windshield and the sheet metal.
Now the other end of wirehanger you are gonna attach a thinner standard copper wire.
you are now gonna pull the wire hanger clear across to the other side making sure you thread the rubber molding. Now it gets fun . you move the wire back and forth back and forth and so on ....until you go completely around the entire windshield. You may need a real long wire to do this and you might ask someone to help you if you need to but you can do this by yourself since I did this also. Do not attempt to lift the windshield until you finish tracing the whole thing. okay. when you are finished tracing it gently push the windshield from the inside out.Be Careful !! Its real heavy. Now you can throw that one out and install the new one.
But first make sure you remove all the excess rubber and adhesive and debris. Then you want to sand the groove a little taking off a little rust, paint, or dirt.
Blow the dirt off and go get your self a new rubber molding and some industrial waterproff adhesive.APPLY the waterproof adhesive stuff and let it dry a little like two minutes. Put the new molding around the new windshield it should fit nice and snug. GENTLY LOWER THE Windshield and place it in its space. Press it into the adhesive in and should be able almost to snap it in the slot. Once its in and its tight you may have to apply anothet bit of that sealant stuff just to make sure it don't leak. Apply thourughly cause at sixty miles an hour in the rain you don't want no whistle or leak. Now when you're sure it set and its nice and dry go ahead and put the stainless cover molding back on Take it to a car wash or hose the beast down to see if leaks. If it doesnt which it shouldnt, Congratulations!!! If it leaks take the stainless cover off and apply more sealant around the outside of the windshield. Apply some on the inside of the windshield too. That should take care of it.
Good luck. It worked on my Volvo.
I had A 760 Turbo Intercooler.