Award Winning Auto Glass Repairs
Insurance Friendly
All Vehicles
Emergency Service
Affordable Pricing

Car Glass Company Towamensing PA

We Can Arrive in Just a Couple Hours!

Get our professional technicians at your door within hours for most jobs.

Our auto glass repair professionals are in the field frequently and are prepared to come to your home or business in a short notice. Our repair vans are outfitted with a wide variety of parts and supplies, permitting us to address repairs on all makes and models of vehicles. We service Towamensing plus all nearby communities in PA.

Our Services

  • Friendly, trustworthy & experienced technicians
  • 24/7 mobile assistance
  • Free consultations
  • 100% satisfaction guarantee
  • Written pricing, up front, no add-ons
  • All makes and models of vehicles
  • We come to your location
  • We work with your insurance company
  • Customer service is our top priority

Windshield Repairs in Towamensing Pennsylvania

Your windshield does not belong with the mysterious, under hood components. Even though we do not give windshield very much thought, they are quite crucial.

Windshields are made using laminated glass. They are fabricated using a layering method. The outside layers are glass and the inner layer is a significant laminate.

The laminate normally is made from a sort of vinyl plastic. In simple words, it is a very strong plastic. The laminate functions as a sticking board for the inner and outer layer of glass. This serves to hold both of these layers together and provides a surface in case of shattering for glass fragments to stick to.

Cars that are newly built have windshields installed by robots in the factory. This is a tightly controlled and monitored setting. The fit and moulding is remarkably tight. This results from the computerized alignment and the preciseness of the robots. Learn more about Towamensing fast windshield repairs from your local repair professional.

Whenever there is damage to a car's windshield, it has to be dealt with right away. Because of the specialized manufacturer's installation and testing, the most desired scenario would be to keep the original glass in place. If the damage is a small chip or crack, this is feasible. A brand new windshield will be called for when the crack has gotten too large to fix or if the damage is in the visual field of the driver.

If spotted early enough the good news is that a tiny chip or little crack can very likely be repaired by do-it-yourself solutions. If you are not comfortable carrying this out yourself, then we suggest seeing a windshield service center at once.

Chip repair may look like such a trivial concern, many individuals will ignore it. However, if not dealt with promptly, the chip can become worse.

Towamensing Windshield Replacement

Assuming your windshield has endured major damages, you're most likely happy to get a windshield replacement carried out. Windshield replacements are significantly more relevant for panes with damage advancing completely through most of the window. In short, if it's stretched across the front of the window longer than a dollar bill, it will need a new windshield. Discover more about glass repair near me in Towamensing 18235 here. Don't despair, a new windshield is going to restore safety back to your car. Under these situations, a new windshield is the best and most suitable choice.

Towamensing Emergency Auto Glass Repairs

When your car has a defective windshield, door glass or back glass, it is more than just a hindrance, it is a safety concern. Also, depending upon the magnitude of the issue, your car might not be operable. So if you need fast, dependable auto glass repair and replacement services in Towamensing, PA, you have come to the best place. We provide unexpected emergency service when you need it the most!

Emergency Service You Want!

Our customers agree, we are steadfast in guaranteeing that your car's glass is fixed correctly, the very first time! While your repair job will be performed very fast, it is also finished with specific standards. As a customer, your safety is our top goal, and we will not send you back out on the road until we're positive that your car is in proper shape.

Windshield FAQ

Window Motor Replacement On 2000 Van?
How Hard Is It To Replace The Power Window Motor On A 2000 Gmc Safarri Van. Any Tips Are Greatly Appreciated

Remove the door panel on the offending door

Step Two After you have your door panel off, you will see a thick plastic covering that is covering everything on the door. This is merely held on by some glue, and can be pulled off.

Step Three After that nasty plastic is gone, your door panel will be exposed. You will see a metal brace, a few holes (lower right and upper middle) and then a lot of rivets. About ten of these rivets are what are holding your window motor and regulator onto the car.

Step Four Before your begin to remove any rivets, tape your window in the all the way up “position.” This way, when you do start drilling or punching out the rivets, your window won’t go crashing down and break.

Step Five Now for those damned rivets. You will need both a ¼” and a 1/8” drill bit. You can also punch out the rivets, but drilling is far easier.

Step Six Locate your window motor near the bottom right hole in the door. There will be a rivet at the far end (closest to the car), two closer to the middle (about 4-5 inches from the end), then there are three or so closer to the middle of the door that also need to be removed. There are five (I think) rivets holding the motor and regulator to the door. There will be 5 more rivets are holding on a large metal brace to the upper left side of the door. This brace needs to come off in order for you to get the motor and regulator out of the door. So remove those 5 rivets, remove the metal brace, and simply pull the whole assembly from your door. If you have trouble getting the assembly out the hole in the door, make sure that the arm attached to the window track is in the up position. So the assembly should come out and a near 90 degree angle.

Step Seven Now its time to separate your motor from the arm that moves the window up and down. There are a number of smaller rivets, not sure how many, that hold the arm to the motor assembly. Simply drill all these out with a drill bit that is larger than 1/8”.

Step Eight Take your new motor and rivet or bolt (whichever you have) and reattach the arm to the motor in the same position you took it off the old one. Make sure the gears are matching up that are on the motor and the arm. Lube everything up good with some grease.

Step Nine You are now ready to put your new assembly back into your door. To do this, once again make sure that the assembly is at a 90-degree angle, or as close to this as you can get. Fit the assembly back into the door.

Step Ten Once it is in the door, position the wheel at the end of the arm back in the track that attaches to the bottom of the window.

Step Eleven Now here’s the fun part, reattaching the assembly to your door. You can either use bolts or rivets to reattach it (I used bolts because I didn’t want to have to deal with those damned rivets if I ever needed to change the motor again). Note: If you have some trouble lining up the holes, this probably means that that your arm that raises and lowers the window is too high. To fix this, plug in the motor, and lower the window a tiny bit at a time until the holes line up. Make sure your hold the motor while you do this.

Step Twelve After you have your assembly reattached to the door, plug it in and test it. Make sure that it goes all the way up and down without any hitches.

Step Thirteen Reattach the plastic if you so desire, put your door panel back on, and enjoy your now functional window.

http://www.amazon.com/DeWalt-DC727KA-Heavy-Duty-12-Volt-Cordless/dp/B0002Q8TGO/ref=sr_1_5/002-5410135-9363225?ie=UTF8&s=hi&qid=1181682834&sr=1-5


http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=+2000+GMC+Safari+window+motor&category0=

I Scratched The Black Partition In Between The Windows Of My Car While Trying To Jimmy It Open. Is There A Product I Can Use To Repair It?
They Are Small Scratches But I Can See The Metal And I Don'T Want It To Rust.

Sure!

Since you just did it, you don't have to worry about cleaning out any rust that might have grown since the damage. If you did, you could scrub off any rust with a glass fiber pen (available in chip repair kits at auto parts stores).

You can apply touch-up paint to reseal the scratch and cover up the base metal so it is protected. With my newer car, I generally go to the dealership's parts counter (usually near the service bays) and buy a small bottle of touch-up paint. It's sold in 1-3 oz containers in a pen form or in a small bottle with a brush on the lid (like nail polish). You can buy it in auto parts stores as well, but for a newer car you may get a better match at the dealership.

Oh yeah... if you can find nail polish in the color you need, it also does a fine job of forming a quick protective coating (though I recommend the touch-up paint).

If you don't mind it being metal colored, you could just apply a coat of wax to the scratch regularly (every 2-3 months), but again... I'd go with the touch-up paint.

How Much Will Driver Side Rear Window Cost In Pittsburgh, Pa ?
My Car Window Is Broken, And I Want To Repair It. How Much Would It Cost?

look in phone book under auto glass and make a few phone calls best shouldnt be much i just had one put in front window for 165 and they came to me

How Do You Repair A Crack In Your Car'S Windshield/Rain Shield?
Scenario: When Nikki Was Parking Her Car In The Parking Lot, She Noticed There Was A Crack In Her Windshield On Her Volvo. She Wants To Replace The Windshield, But She Doesn'T Know How? Should She Let The Car Repair Pros Do The Job Or Replace It Herself?

The repair people are saying that if the crack can be covered by a dollar bill the windshield can be repaired. Everybody uses the Novus system, which evacuates the crack and fills it with resin, then cures it with UV light. It takes about an hour and most windshield repair places will go wherever the car is parked and do the repair. The repair is virtually invisible (you can see it if you know where to look and look hard) and is generally guaranteed not to crack again for the life of the windshield. Here in Arizona, the Land of Rocks, we use the service a lot.

If the crack is larger than that the windshield has to be replaced. Definitely a job for a pro, it costs around $300 for most windshields. I have used Safelite, which offers prices and appointments on the web, and goes where the car is to do the work. Other companies may be as good or better, so feel free to shop around.

We Serve Towamensing, PA 24 Hours a Day